Query returned 1261 results.
Practice Based Learning Approaches in Collaborative Design and Engineering Education: A Case Study Investigation into the Benefits of a Crossdisciplinary Practice Based Learning Strategy
Christian, Mclening; Lyndon, Buck // 2012
This study explores the ongoing pedagogical development of a number of undergraduate design and engineering programmes in the United Kingdom. Observations and data have been collected over several ...
Problem-Based Teaching in Mechanical Engineering Design - A Collaborative Course Model
Lindow, Kai; Hanayli, Mehmet Mert; Kaluza, Andrea; Buchert, Tom; Stark, Rainer // 2012
This paper deals with a new approach for problem-based teaching that has been developed to meet the needs of today’s industry. After giving a definition of problem-based teaching against the ...
Project Work on Wellbeing in Multidisciplinary Student Teams: A Triple Testimonial on EPS at Artesis
Baelus, Chris; Dani, Sarah Rohaert // 2012
international educational concept, in 2012 the Artesis University College became the first Belgian EPS provider to offer a multidisciplinary EPS programme in close collaboration with the following ...
PROPOSAL FOR FUNCTIONAL PRODUCT DESCRIPTION AS PART OF A PLM SOLUTION IN INTERDISCIPLINARY PRODUCT DEVELOPMENT
Eigner, M.; Gilz, T.; Zafirov ,R. // 2012
The transparency between disciplines in engineering is not sufficient. Within modern products interdisciplinary collaboration is important. This paper presents a concept that addresses this problem ...
Prototyping - The Collaborative Mediator
Berglund, Anders; Ritzen, Sofia // 2012
Given the potential to deliver ‘future wellbeing products’, learning mechanisms behind the establishment of such efforts is vital. In this scenario, early efforts are manifested in prototypes that ...
Stability of collaborative R&D networks: A simulation study
Gust, P.; Altfeld, N.; Kreutzfeldt, J. // 2012
To reduce the likelihood that R&D projects fail, companies tend to perform R&D activities in collaborative networks. A fundamental characteristic of networks is stability. This paper introduces ...
STARTING UP NETWORKED INNOVATION PROJECTS
Maurer, C.; Valkenburg ,R. // 2012
Networked innovation, the collaboration of companies as partners, is increasingly put forward as a potential means to boost innovation. Yet, still little is known about the way networked projects ...
Teaching Students How to Professionally and Persuasively Act as Design Consultants in Collaborative Industry Projects
Liem, Andre // 2012
The motivation for undertaking collaborative design projects within the context of consultant – client relationships, is not only to train design students to solve complex design problems, but also ...
Technology-Driven Innovation: Applying the Technology to Product Tool in an Educational Setting
De Keersmaecker, Ann; Jacoby, Alexis; Baelus, Chris // 2012
Technology to Product is a software tool to support technology driven innovation at the Front End of Innovation. The tool is result of a close collaboration with researchers (Artesis University ...
The Explainer and its use in engineering
Steward, D. V. // 2012
The Explainer method and program can be used for solving problems that are more complex than people can deal with without such help. It could be used as a social network in which people ...
The Future of Industrial Design Higher Education Driven by Models of Design Thinking and Reasoning
Liem, Andre; Sigurjonsson, Johannes B. // 2012
This conceptual paper argues that the future of industrial design education is determined by the ability of design programs to consciously position themselves according to higher education trends. ...
The Nordcode Network: A Scandinavian Approach to Doctoral Education in Design
Keitsch, Martina Maria // 2012
Artefacts play an important role in culture and society and contribute to how we see, interpret and communicate about the world. However, scientific knowledge on how these artefacts are designed, ...
Towards a platform for New Concept Development: when kansei and design-thinking approaches meet
Gentner, Alexandre; Bouchard, Carole; Esquivel Elizondo, Daniel; Favart, Carole // 2012
This paper, part of a PhD research, focuses on ways to improve new concept development (NCD) activities. This research is done in collaboration with the Kansei Design (KD) division of Toyota Motor ...
Towards describing co-design by the integration of Engineering Design and Technology and Innovation Management literature
Parraguez Ruiz, Pedro; Maier, Anja M. // 2012
The purpose of this paper is to provide an overview of the available literature concerning the understanding and improvement of co-design processes. The most pertinent aspects of such processes are ...
Virtualizing the Obeya
Aasland, Knut; Blankenburg, Detlef // 2012
The Obeya is known as part of the Toyota Product Development System and Lean Product Development. Literature describes the Obeya as one of the tools of the TPDS, but rarely discusses what really ...
A METHODOLOGY FOR DESIGNING A RECOMMENDER SYSTEM BASED ON CUSTOMER PREFERENCES
Jomaa, Inčs; Poirson, Emilie; Da Cunha, Catherine; Petiot, Jean-François // 2011
This paper presents a contribution to design an online preference based system. The objective of the system is to assist a customer in the products selection process. Current e-commerce ...
A METRIC TO REPRESENT THE EVOLUTION OF CAD/ANALYSIS MODELS IN COLLABORATIVE DESIGN.
Drémont, Nicolas; Graignic, Pascal; Troussier, Nadčge; Whitfield, Robert Ian; Duffy, Alex // 2011
Design process is dynamic and uses an important number of models during its progress. CAD (Computer Aided Design) models and CAE (Computer Aided Engineering) are used during design and an important ...
A PARAMETRIC DESIGN FRAMEWORK TO SUPPORT STRUCTURAL AND FUNCTIONAL MODELING OF COMPLEX CONSUMER ELECTRONICS PRODUCTS
Seki, Kenichi; Nishimura, Hidekazu; Zhu, Shaopeng; Balmelli, Laurent // 2011
Today's market demand for smaller and more powerful consumer electronic devices poses a major challenge to the rapid design of products. In addition, the ability to perform strategic ...
A Review of Open ICT Tools for Collaborative Teaching & Learning
Bohemia, Erik; Turnock, Chris // 2011
The Open ICT Tools project explored the use of open source Web 2.0 applications to facilitate collaboration between School of Design at Northumbria University and its international business and ...
ADAPTING AEROSPACE DESIGN RATIONALE MAPPING TO CIVIL ENGINEERING: A PRELIMINARY STUDY
Eng, Nathan Lee; Marfisi, Emanuele; Aurisicchio, Marco // 2011
A pilot study of aerospace design rationale capture methods in civil engineering was performed to improve support for information management and systems thinking. Deploying software-based methods in ...
ADAPTING INDUSTRIAL DESIGN EDUCATION TO FUTURE CHALLENGES OF HIGHER EDUCATION
Liem, Andre; Sigurjonsson, Johannes B. // 2011
This paper discusses how Design Education should be adapted to the future challenges of higher education. Four (4) trends will be presented on how prospective design programs are to be developed. ...
Application of Design Models in Mechatronic Product Development and Building Design – Reflections of Researchers and Practitioners
Eisenbart, Boris; Blessing, Luciënne // 2011
Design models are an essential means for abstract representation and visualisation of information in the design process. Comprehension of design models in interdisciplinary engineering design teams ...
Approaches to a Cross-Cultural Engineering Design Theory
Brezing, Alexander Nikolaus; Childs, Peter; Yim, Hyunjune; Bland, Paul Wilson; Rau, Pei-Luen Patrick // 2011
Engineering Design Theory as an integral part of engineering education serves the purpose of structuring the actions and thinking processes of practitioners in order to increase the efficiency of the ...
Biologizing Product Development— Results from a Student Project
Helten,Katharina; Schenkl,Sebastian; Lindemann,Udo // 2011
Biomimeticsbecome a more and more attracting topic in the field of product development. Whereas most literature aims for a codification of biology knowledge in order tomake it usable in fferent forms ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.